Why a Class 7 MOT bay is worth considering
Class 7 covers goods vehicles from 3,000kg to 3,500kg, which takes in many of the larger vans used by builders, couriers, fleets and local businesses. These vehicles need a bigger lift, a stronger brake tester and more room to move around than a Class 4 car bay can offer. A garage without a Class 7 bay has to send these vans elsewhere for their test, so adding one can open up a steady source of test income and the repair and servicing work that follows a failed test.
Hofmann Megaplan can supply a complete Class 7 package or the individual items you need, from a new test centre to a replacement lift or brake tester.
The equipment in a typical Class 7 package
A typical Class 7 package from us includes:
- a 4 post MOT ATL Class 7 lift
- radius plates (turnplates)
- a play detector
- a jacking beam
- a headlamp beam setter
- a roller brake tester
- a smoke and gas analyser for diesel and petrol emissions
Every item is chosen to work with the others. The lift suits the turnplates and play detector, the jacking beam fits the lift, and the test equipment connects to the MOT Testing Service where that is required.
Class 7 MOT and ATL lifts
A Class 7 lift has to be noticeably bigger than a Class 4 lift, with a greater lifting capacity, to cope with vans of 3,000kg to 3,500kg. Our Class 4 and Class 7 MOT/ATL lifts are made 100% in Spain by Cascos, who began building lifts in the 1960s and have made lifts for UK MOT testing ever since. The current Class 7 range includes:
- C451MOT, 5,000kg capacity and a 5.2m platform, with front recesses for turnplates
- C451MOTATL, 5,000kg capacity and a 5.325m platform, with turnplates and shaker plates included
- C451XLMOTATL, 5,000kg capacity and a 5.7m platform, with turnplates and shaker plates included
- T5.5 ATL scissor lift, 5,500kg capacity and a 5.2m platform, with turnplates and shaker plates included
ATL models are designed for Automated Test Lane use. All Cascos lifts use traditional pneumatic locks.
Roller brake testers
Our roller brake testers come from an Italian facility with more than 25 years of history and over 12,000 units installed worldwide. The Class 7 version is approved for light commercial vehicles up to a maximum load of 7.5 tons. It has two 4kW braked motors, rollers covered with corundum, an integrated weighing system and Windows test management software. It is fully galvanised and DVSA connected.
Emissions testing
Our emissions testers cover petrol and diesel vehicles. The DVSA approved i-Gas combines gas and smoke analysis on a mobile trolley and can work with our roller brake tester software, and the OPA-100 opacimeter and AGS-200 exhaust gas analyser are also available.
Headlamp beam setters
Our headlamp testers check and adjust high, low and fog lights, including Xenon and LED headlamps. They are DVSA and CE approved, with mirror or twin laser alignment and a sturdy anti-tip base.
Jacking beams
Our extra-wide jacking beams fit all the MOT lifts we supply and extend 240mm wider than a standard beam, which helps with wider modern vans and EVs. For Class 7 bays there is a 2.6 tonne beam with either a manual pump (SD26L-W) or a pneumatic pump (SD26PHL-W).
Choosing the right Class 7 setup
Start with the building. Class 7 platforms run from 5.2m to 5.7m long, so measure the length, width and height of the bay carefully, including room to walk round the van and to drive on and off straight. Check the headroom with a high roof van raised on the lift, as this is where many otherwise suitable buildings fall short.
Next, decide between a standard MOT lift and an ATL lift. The C451MOT has front recesses for turnplates and can suit a bay that already has some of the equipment. The ATL models bring turnplates and shaker plates built in and are designed from the start for test lane work. If you see a lot of long wheelbase vans, the C451XLMOTATL with its 5.7m platform gives you extra length.
Where workshop height is limited, an inspection pit is a real alternative to a lift for Class 7 testing. A pit gives easy access to the underside of the vehicle and lets one technician work underneath while another works above.
Running Class 4 and Class 7 side by side
Many garages already test cars and want to add vans. Where space allows, a larger Class 7 lift gives you extra flexibility for mechanical work, which is why it can be worth the slightly higher investment even in a bay used mostly for cars. If you are planning both, our Class 4 MOT bay page explains the car side of the package.
A dual revenue MOT bay pairs a dual purpose ATL lift with suitable wheel alignment equipment, so the same space can carry out wheel alignment checks and adjustments when it is not being used for testing.
Connected equipment and DVSA requirements
Connected equipment sends results straight to the MOT Testing Service, which saves time, cuts input errors and removes the need to print results. Roller brake testers, decelerometers, diesel smoke meters and exhaust gas analysers are all covered. New test centres, changes of ownership, extra test lanes and most replacement equipment must now be connected. Our page on connected MOT equipment sets out the rules, and we specify connected equipment wherever it is needed.
From survey to after-sales support
We can talk you through the whole process or take it on for you, from equipment selection and project work through to the administration and legal requirements. We start by reviewing your workshop layout and checking the dimensions for the new bay. All the products we use are European made and chosen for their build quality, ease of use and reliability, and we are in it for the long term.
Why Hofmann Megaplan for your Class 7 bay
You deal with one supplier who understands how the lift, brake tester, emissions equipment and headlamp tester fit together for heavier vans. That keeps planning simple, keeps the bay compliant and gives you one number to call. We also supply commercial vehicle equipment for the workshop beyond the test bay, and you can see the full range on our MOT test equipment page.
Frequently asked questions
Which vehicles need a Class 7 MOT?
Class 7 is for goods vehicles from 3,000kg up to 3,500kg, which includes many larger vans. Cars and lighter vans are tested in Class 4.
Is it worth fitting a Class 7 lift in a car bay?
If space allows, a Class 7 lift gives you extra flexibility for mechanical work and keeps the option of testing larger vans open. Talk to us about how you plan to use the bay and we will confirm the right setup.
My workshop is not very tall. Can I still have a Class 7 bay?
Possibly. An inspection pit is a good alternative to a lift for Class 7 testing where height is limited. We can check your building and suggest the best option.
What capacity jacking beam do I need for Class 7?
Our Class 7 jacking beam is rated at 2.6 tonnes and comes with a manual or pneumatic pump.
How do I get a price?
Call us on 01480 891011 or use the contact form, and our MOT bay team will talk through the equipment your bay needs.
Plan your Class 7 MOT bay with us
Talk to our MOT bay team about the right lift and test equipment for testing larger vans.
Ask an expert Call 01480 891011