What goes into a Class 4 MOT bay
Class 4 is the busiest MOT class in most garages. It covers cars, light vans under 3,000kg and many of the everyday vehicles that keep a workshop full. A well equipped Class 4 bay brings in regular test income and a steady stream of follow-on work, from tyres and brakes to suspension and exhaust repairs. To get there, the bay has to meet DVSA requirements, suit your building and let your testers work quickly and accurately on every vehicle.
Hofmann Megaplan can supply the complete package or the individual items you need. That might be a full new test centre, an extra lane in an existing station, or a like-for-like replacement for a lift or brake tester that has reached the end of its life.
The equipment in a typical Class 4 package
A typical Class 4 package from us includes:
- a 4 post MOT or ATL Class 4 lift
- radius plates (turnplates)
- a play detector
- a jacking beam
- a headlamp beam setter
- a roller brake tester
- a smoke and gas analyser for diesel and petrol emissions
Each item is chosen to work with the others, so the lift recesses suit the turnplates, the jacking beam fits the lift and the test equipment connects to the DVSA system where that is required.
Class 4 MOT and ATL lifts
Our Class 4 and Class 7 MOT/ATL lifts are made 100% in Spain by Cascos, who began building lifts in the 1960s and have made lifts for UK MOT testing ever since. The current Class 4 range includes the C431MOT with 3,200kg capacity and a 4.1m platform, the C441MOT with 4,000kg capacity and a 4.335m platform, the C441MOTATL at 4,000kg with turnplates and shaker plates included, and the RAV 635NIMOT4 ATL scissor lift at 3,500kg with a 4.6m platform. ATL models are designed for Automated Test Lane use and come with turnplates and shaker plates as standard.
Cascos lifts use pneumatic locks, platforms reinforced with hot rolled profiles to keep them flat over the life of the lift, and a double mechanical safety system backed by a pneumatic security system. The ATL lifts are also strengthened to cope with the vibration of the play detector.
Roller brake testers
Our roller brake testers come from an Italian facility with more than 25 years of history and over 12,000 units installed worldwide. The Class 4 version is approved for cars, three-wheelers, quadricycles, quads and motorcycles up to a maximum load of 4 tons. It has an integrated weighing system, Windows test management software, fully galvanised steel construction and is DVSA connected.
Emissions testing
Our emissions testers cover both petrol and diesel vehicles. The DVSA approved i-Gas combines gas and smoke analysis on a mobile trolley and can integrate with our roller brake tester software. The OPA-100 opacimeter and AGS-200 exhaust gas analyser are also available, and the MGT-300 Evo reads RPM and temperature on petrol and diesel vehicles.
Headlamp beam setters
Our headlamp testers check and adjust high, low and fog lights, including Xenon and LED headlamps. They are DVSA and CE approved, with mirror or twin laser alignment and a robust anti-tip base.
Jacking beams
Our extra-wide jacking beams fit all the MOT lifts we supply and extend 240mm wider than a standard beam, which helps with wider modern vehicles and EVs. Class 4 bays can choose a 2.0 tonne beam with a manual or pneumatic pump.
Choosing the right Class 4 setup
Start with the space you have. Measure the length, width and height of the bay and check whether there are existing recesses in the floor. Mature testing stations working on grandfather rights often have small bays, and Cascos still makes one of the few 4 post lifts that will fit them, which makes it a sensible replacement choice.
Next, decide between a standard MOT lift and an ATL lift. An ATL lift brings turnplates and shaker plates built in and is designed from the start for test lane work. A standard MOT lift with front recesses for turnplates can suit a smaller budget or a bay that already has some of the equipment.
If you have the room, it can be worth spending a little more on a larger lift. A Class 7 lift in a Class 4 bay gives you extra flexibility for mechanical work, and it leaves the door open to testing bigger vans later in a Class 7 MOT bay. Where headroom is a problem, an inspection pit is another option worth considering.
Making the bay earn more between tests
An MOT bay is not always busy. A dual revenue MOT bay pairs a dual purpose ATL lift with suitable wheel alignment equipment, so the same space can carry out wheel alignment checks and adjustments when it is free. For many garages this turns quiet periods into useful extra income.
Connected equipment and DVSA requirements
Connected equipment sends test results straight to the MOT Testing Service, which saves time, cuts input errors and removes the need to print results. Roller brake testers, decelerometers, diesel smoke meters and exhaust gas analysers are all covered. New test centres, changes of ownership, extra test lanes and most replacement equipment must now be connected. Our page on connected MOT equipment explains the rules, and we always specify connected equipment where it is needed.
From survey to after-sales support
Setting up an MOT bay involves more than buying equipment. We offer as much or as little help as you need, from surveying and design through building work, finance and installation. Our MOT specialists keep up to date with DVSA requirements and can guide you through the options for your building.
The products we use are European made and chosen for build quality, ease of use and reliability. Because we supply the equipment and the installation, we can look after your bay long after it opens and make sure it is still working well for years to come.
Why Hofmann Megaplan for your Class 4 bay
You deal with one supplier who understands how the lift, brake tester, emissions equipment and headlamp tester fit together. That makes planning simpler, keeps the bay compliant and gives you one number to call if anything needs attention. You can see the wider range on our MOT test equipment page.
Frequently asked questions
Which vehicles can I test in a Class 4 bay?
Class 4 covers cars and light vans under 3,000kg, along with other light vehicles in the class. Larger vans between 3,000kg and 3,500kg need a Class 7 bay.
Can I replace just the lift in my existing bay?
Yes. We can supply a single replacement lift, including Cascos models that fit the recesses of older, smaller bays.
What is the difference between an MOT lift and an ATL lift?
An ATL lift is designed for Automated Test Lane use and includes turnplates and shaker plates as standard. A standard MOT lift has front recesses for turnplates.
Does my brake tester need to be connected?
New and replacement roller brake testers must be connected to the MOT Testing Service. Our Class 4 brake tester is DVSA connected.
How do I get a price?
Call us on 01480 891011 or use the contact form, and our MOT specialists will talk through the equipment your bay needs.
Plan your Class 4 MOT bay with us
Talk to our MOT specialists about the right lift and test equipment for your building.
Ask an expert Call 01480 891011