Full-height wheel-free scissor lifts as a space-saving alternative to the 2 post lift
A full-height wheel-free scissor lift raises a car by its lifting points to a working height that gives full access underneath, just like a 2 post lift. The difference is that there are no columns standing at the side of the bay. The lift folds down close to the floor when lowered, so the car can be driven straight over it, and the space around the vehicle stays open.
That saving in footprint is one of the main reasons garages choose a scissor lift. It matters most in multiple bay workshops, where using scissor lifts instead of 2 post lifts can mean you fit more bays into the same building. A clear, uncluttered bay also looks smart, which helps in a workshop where customers can see the work being done.
Our full-height wheel-free scissor lifts
VSX3500-LP scissor lift
The VSX3500-LP is a very well priced, ultra low profile full-height scissor lift for surface mounting, with a 3,500kg capacity and a completely clear working area between the structures. It uses our SureFast hidden locking design, which lets you stop the lift at any height rather than at set positions dictated by external mechanical locks. An automatic emergency lowering system in the event of a power cut and a neat, compact control console complete the specification.
Cascos 3000 Evo II scissor lift
The Cascos 3000 Evo II has an exceptionally low lowered height of just 105mm, which makes it a good alternative to the cost of civil works for a recessed lift. Its 3,000kg capacity covers a good portion of the car and van market, and telescopic platforms deal neatly with different wheelbases. It is manufactured 100% in Spain.
Cascos 3600 scissor lift
The Cascos 3600 is an in-ground lift for recessed installations. Setting the lift into the floor allows a higher capacity of 3,600kg, and telescopic extending platforms allow longer wheelbase vehicles to be mounted, making it one of the most versatile scissor lifts of its kind. It is also manufactured 100% in Spain.
Surface mounted or in-ground?
The biggest decision with a full-height scissor lift is how it will be installed.
- Surface mounted lifts such as the VSX3500-LP and Cascos 3000 Evo II sit on the existing workshop floor. There is no digging, installation is quicker and the lift can move with you if you change premises. The low lowered height means most cars drive on easily.
- In-ground lifts such as the Cascos 3600 are recessed so the platforms sit flush with the floor. The bay is completely level when the lift is down, and the design allows a higher capacity, but you need civil works and the bay is out of use while they are carried out.
If you own the building and want the cleanest possible bay, in-ground is worth considering. If you rent, or need the lift working quickly, a low profile surface lift is usually the sensible choice.
Choosing the right lift
Look at the heaviest vehicles you lift regularly and the longest wheelbase you see. For cars and smaller vans, the 3,000kg Cascos 3000 Evo II is a strong choice where a very low lowered height matters. For heavier vehicles, the 3,500kg VSX3500-LP gives more capacity on a surface mount, with SureFast locking. If you want the highest capacity and are happy to recess the lift, the Cascos 3600 handles 3,600kg and longer wheelbases. If you only need to lift cars to a comfortable height for tyre or body work, our mid-rise scissor lifts may be all you need.
Scissor lift or 2 post lift?
A 2 post lift is still a great all-rounder, with very open access to the underside and a wide spread of capacities. A full-height scissor lift gives similar access to most of the underside while taking up less floor and leaving the sides of the bay clear. If the car should stay on its wheels, for alignment or MOT work, a full-height platform scissor lift is the better fit. You can compare every type on our scissor lifts page.
Planning your bays
Measure the length and width of each bay and check the floor, power supply and ceiling height. For an in-ground lift, plan the civil works early and think about drainage and access. If you are fitting out several bays, send us a plan of the building and we can show you how many lifts will fit and how the bays could be laid out.
Looking after your lift
Keep the scissor mechanism and the area under the lift clean, check the locking system engages properly and look out for any hydraulic leaks. Make sure every technician knows how to position the pads on the correct lifting points before raising the car.
Heavy wheels are worth thinking about too. With the car at full height, technicians often take wheels off at an awkward height and carry them across the bay. Our battery powered WC350D wheel lifter is designed for vehicles on wheel-free scissor lifts and takes that weight off your team.
Why Hofmann Megaplan
We supply scissor lifts alongside 2 post and 4 post lifts, so we have no reason to push one type over another. We will look at your building, the vehicles you work on and the way your team works, and recommend the lift that genuinely suits the job. Because we also supply tyre, wheel balancing and alignment equipment, we can help you plan the whole bay, not just the lift.
Frequently asked questions
Can I fit a full-height scissor lift without digging up the floor?
Yes. The VSX3500-LP and Cascos 3000 Evo II are designed for surface mounting.
What is the lowest lowered height?
The Cascos 3000 Evo II lowers to just 105mm.
What happens to the VSX3500-LP in a power cut?
It has an automatic emergency lowering system for power outages.
Which lift has the highest capacity?
The in-ground Cascos 3600 lifts 3,600kg.
How do I get a price?
Call us on 01480 891011 or use the contact buttons on any lift.